Search results for: #define

define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE" #define

define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE" #define

define ADC_ATTEN_DB_0 ADC_ATTEN_0db ... #define ADC_WIDTH_BIT_12 ADC_WIDTH

define TFT_MISO 14 // SDO(MISO) #define TFT_MOSI 11 // SDI(MOSI) #define TFT_SCLK

define adc_channel_max 5 //sga changed from 8 All with no joy . Ugg The example

define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE" #define

define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE" #define

define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE" #define

UART_COUNT<1 but with i2c there is easy check for some i2c slave #define

define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E) I need to debug : CAN Bus data

define T_MIN_STEP 4 // ~333ms #define T_MAX_STEP 16 // ~1300ms #define X_STEPS

define JS_VERSION "2v08" in jsutils header. The minor version should be near. ;-) So, Q1 is self

define TVTIMER TIM4 ^~~~ libs/tv/tv.c:91:25: note: in expansion of macro 'TVTIMER' TIM_ClearITPendingBit(TVTIMER

define TVTIMER TIM4 ^~~~ libs/tv/tv.c:108:27: error: 'SPI_I2S_IT_RXNE' undeclared (first use in this

define NRF_NFCT_ERRORSTATUS_ALL (NFCT_ERRORSTATUS_NFCFIELDTOOWEAK_Msk | \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ targetlibs/nrf5x_15/components/nfc/t2t_lib/hal_t2t/hal_nfc_t2t.c:129:42: note: in definition

define NRF_NFCT_ERRORSTATUS_ALL (NFCT_ERRORSTATUS_NFCFIELDTOOWEAK_Msk | \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ targetlibs/nrf5x_15/components/nfc/t2t_lib/hal_t2t/hal_nfc_t2t.c:129:42: note: in definition

define BLE_GATT_HANDLE_INVALID 0x0000 /**@brief First Attribute Handle. */ #define BLE_GATT_HANDLE_START

define JS_VERSION "2v06" >#else >#define JS_VERSION "2v06." BUILDNUMBER >#endif and targets/nrf5x_dfu/main.c ``` lcd_println

DEFINES = -DGIT_COMMIT=1921e46 -DBUILDNUMBER="274" -DESP_PLATFORM -DESP32=1 -DJSVAR_MALLOC -DUSE_DEBUGGER -DUSE

defined (NRF52) #ifndef NRF52832_XXAA #define NRF52832_XXAA #endif #endif ``` This defines `NRF52832_XXAA`, and thus

define NRFX_UARTE_ENABLED 0" into nrf_drv_uart.h seems to have got it working

sense as sdk_config.h has this: ``` #define NRFX_UARTE_ENABLED 0 #define NRFX_UARTE0_ENABLED 0 ```

define PATTERN_PULSE_T0H() for(uint32_t i = 0; i < 17; i++) {__NOP();} \#define PATTERN

define NUM_LEDS 32 #define BRIGHTNESS 10 #define DATA_PIN 4 // Define the array of leds

define BTN1_PININDEX 30/* D30 */ #define BTN1_ONSTATE 1 #define BTN1_PINSTATE JSHPINSTATE_GPIO_IN_PULLDOWN