-
Would you please post the results of entering in the IDE: process.env
Here are the results:
={
"VERSION": "1v80",
"BUILD_DATE": "Aug 7 2015",
"BUILD_TIME": "11:30:04",
"GIT_COMMIT": "44f2fc15e94e3eac6cb0cbd908b66ec8886e9d88",
"BOARD": "ESPRUINOBOARD",
"CHIP": "STM32F103RCT6",
"CHIP_FAMILY": "STM32F1",
"FLASH": 262144, "RAM": 49152,
"SERIAL": "39ffe105-47483537-09671543",
"CONSOLE": "USB",
"EXPORTS": { "jsvLock": 95777, "jsvLockAgainSafe": 95763, "jsvUnLock": 95739, "jsvSkipName": 48017,"jsvMathsOp": 83813, "jsvMathsOpSkipNames": 103165, "jsvNewFromFloat": 43857, "jsvNewFromInteger": 43899, "jsvNewFromString": 193573, "jsvNewFromBool": 43877, "jsvGetFloat": 70037, "jsvGetInteger": 192485, "jsvGetBool": 83453, "jspeiFindInScopes": 63905, "jspReplaceWith": 127945, "jspeFunctionCall": 53589, "jspGetNamedVariable": 112893, "jspGetNamedField": 112749, "jspGetVarNamedField": 112349, "jsvNewWithFlags": 193369 }
Sun 2019.01.20
Hello @user97113
@allObjects was inquiring as to whether a re-flash to a more recent version of Espruino had been performed, and what is that version.
Would you please post the results of entering in the IDE:
Knowing that tidbit may garner some insight into the serial setup issue.
How are you powering these two boards? Do you have a way to measure the voltage at Vcc?
Please check your Tx Rx connections. Compared with the table on the GPS doc page, they seem opposite.