Search results for: #endif

system memory to address 0x0000 0000 in address space #ifdef STM32F4 SYSCFG->MEMRMP = 0x01; #endif ```

endif #define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE

endif #define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE

endif /*========================================================================= -----------------------------------------------------------------------*/ #define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE

endif /*========================================================================= -----------------------------------------------------------------------*/ #define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE

endif #define FACTORYRESET_ENABLE 1 #define MINIMUM_FIRMWARE_VERSION "0.6.6" #define MODE_LED_BEHAVIOUR "MODE

endif while (byteLength>=4096 && !jspIsInterrupted()) { @@ -2662,7 +2662,7 @@ void jshFlashWrite(void * buf, uint32_t addr

endif +#endif +NRF_RTC0->TASKS_START = 1; #endif ``` It looks like the PRESCALER configuration works

endif ``` could be a better patch handling both cases, but it doesn't matter that

endif ``` actually does not work well when softdevice is disabled and both those parts should

endif #endif #endif return obj; ``` It compiles and runs on the NRF52840DK and is the desired

endif +#endif #endif ``` It builds for me with that but don't have any device

endif ``` So maybe you don't actually want to use SPIFLASH_SLEEP_CMD, but instead

endif bool dfu_start; + if (NRF_POWER->GPREGRET == 1) { NRF_POWER->GPREGRET=0; return true

endif around all the code definitions that follow Also the change of including i2c/spi/serial code

endif jsvInit(0); jsiInit(!buttonState); // pressing USER button skips autoload ``` The code is for the stm32

endif } ``` and here is the output: ``` >Uwatch.isCharging() *-> isCharging Debug: *-> PIN: 19 *-> ReadPin 1 *-> DBG PIN Valid

endif } ``` and this is the output in the espruino ide when I now call Uwatch.isCharging

endif + if (NRF_POWER->GPREGRET == 1) { NRF_POWER->GPREGRET=0; return true; } #ifdef BUTTONPRESS_TO_REBOOT

endif - config.lrck_pin = NRF_DRV_I2S_PIN_NOT_USED; + config.lrck_pin = 23; config.mck_pin = NRF_DRV_I2S_PIN_NOT_USED

endif // NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED SLEEP_LOCK(); ##if NRF_PWR_MGMT_CONFIG

endif and targets/nrf5x_dfu/main.c ``` lcd_println("DFU " JS_VERSION "\n"); ``` I mean why the output on my screen

endif ``` and it seems to work fine, no lost characters and webide can connect. Then

endif while(1) { jsiLoop(); // Perform the primary loop processing } } ``` With little or not success, JSVARS

endif #endif ``` This defines `NRF52832_XXAA`, and thus causing both `nrf52832_peripherals.h` and `nrf52840_peripherals.h