Search results for: #define

define i2c_master_wait(x) os_delay_us(x/4) // do{}while(0) ``` When x is under

defined (STM32F401xx) // 84Mhz -#define PLL_N 336 -#define PLL_P 4 +#define PLL_N 84 +#define

define true (1) ^ In file included from /home/poul/Programmer/Espruino/tve/Espruino/src/jsutils.h:24:0, from targets/esp8266/i2c_master.c:34: /home/poul/Programmer/uPython/esp-open-sdk/xtensa-lx106-elf/lib/gcc/xtensa-lx106-elf/4.8.2/include/stdbool.h:34:0: note

define i2c_master_getDC(void) ((GPIO_REG_READ(GPIO_IN_ADDRESS) >> pinSDA) & 1) ``` so I made

define and C back to D Now it compiles without errors attached the version including

define - line was not displayed correct without ```` // insert after last #include extern int os_printf

define i2c_master_getDD(void) ((GPIO_REG_READ(GPIO_IN_ADDRESS) >> pinSCL) & 1) // PB ``` ``` /****************************************************************************** PB * FunctionName

define FLASH_MAX (1024*1024) #define FLASH_MMAP 0x40200000 #define FLASH_PAGE_SHIFT 12 // 4KB #define

define: ``` #define jsError(fmt, ...) do { \ FLASH_STR(flash_str, fmt); \ jsError_flash(flash_str, ##__VA_ARGS

define MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH -0x6D00 /**< Public key type mismatch (eg, asked

define` that says 'this build only transmits character data on idle, so always drop characters

easy - the code posted there just needs a bit of tweaking to 'inline' the `#define` statements.

define that gets set for different platforms to make this bigger in the esp8266 case

define IS_PIN_USED_INTERNALLY(PIN) ((false)) ``` It might be good to define D6 through

define STM32F429_F439xx not being found in STM32f4xx.h. I've tried forcing the #define STM32F429xx

define ledpin 13 #define ledpin2 14 //note that there's no led connected here on normal

with #define ... will try compiling as a PICO and change only linker file and mem.

define U8G_ESC_VCC(x) 255, (0xbe | ((x)&0x01)) \#define U8G_ESC_END 255, 254 \#define

defines are looking good as well: #define SD_CS_PIN 8/* A8 */ #define SD_DI_PIN 30/* B15 */ #define

define CBC 1 #define ECB 0 //ECB is not a very secure cipher to use. #include

define CBC 1 #define ECB 0 //ECB is not a very secure cipher to use. #include

modified #define USARTS 3 to #define USARTS 5 Still i am getting error .... any suggestions

define SYSTICKS_BEFORE_USB_DISCONNECT 2 to #define SYSTICK_RANGE 0x0100000 #define SYSTICKS_BEFORE_USB_DISCONNECT

define and #ifdef , and have that handled by the webide before it sends the code

define ListenST 1 #define CommandST 2 #define TransmitST 3 #include #define rxpin 19 #define txpin