You are reading a single comment by @Gordon and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@Gordon
I've literally just added this because someone else was complaining about having to press their button... If you try the development app loader, then More... -> Advanced Options -> Automatically reload watch after app App Loader actions it'll do it
A smartphone repair shop might do it, yes - they'd just have to be aware they shouldn't get the PCB too hot, and they'd need a way to stick the LCD back on.
Or, you could order a replacement LCD (https://shop.espruino.com/banglejs2-lcd) and if you let us know I'll chuck in a new button PCB. In that case you can just use a hair dryer to get the LCD off and not care about the temperature.
All you really need are some thin tweezers for the button PCB and maybe a knife to help pry the LCD off, and some glue to hold it back on - it doesn't require much in the way of specialist tools.
Glue is a bit more tricky - ideally you'd use black "Neutral cure"silicone/instant gasket that doesn't have the strong acetic acid smell when curing. I believe something like https://www.amazon.co.uk/Visbella-Black-Temperature-Gasket-Silicone/dp/B0751HQTBL should do it - the magic word you're after is "Neutral"