-
• #2
Can the watch still connect to the Banglejs apps page via bluetooth? If so, and the game is on the page, try uninstalling it from there.
-
• #3
I can only connect to the watch through espruino command line. Not through the web bluetooth client. So can't uninstall like normally, but with the client from the terminal I can install Js files, but I then need the bootloader files or the whole OS.
-
• #4
You'll need a more experienced user's answer then, I'm afraid. My suggestion had got me out of a similar problem when first using the watch, but it obviously doesn't always work.
-
• #5
Have you checked the troubleshooting page? This particular entry sounds exactly like what you're describing:
https://www.espruino.com/Troubleshooting+Bangle.js#my-bangle-js-no-longer-boots-to-the-clockThere are also entries for connectivity issues on there (in case you haven't seen them already).
And when you say CLI, do you mean the Web IDE? Just making sure...
-
• #6
No, when I write CLI, i mean the npm espruino, that you can use from the terminal. I can't contact the watch from the web IDE, since I can't enable bluetooth, however the trick with holding btn 1 after reboot show the MAC address and you can use
espruino -p MAC address
In that way you can install js code.
-
• #7
The Web IDE/Bangle App Loader should still work if you can connect with the CLI tool. Maybe try it from a different device?
As mentioned, the link at https://www.espruino.com/Troubleshooting+Bangle.js#my-bangle-js-no-longer-boots-to-the-clock should sort you out.
Or... I guess you can see the Bangle.js version on the Mac address screen? Which version is it? If the firmware has never been updated then the Bangle could have a similar issue - in which case you'd need to follow the steps at https://www.espruino.com/Bangle.js#firmware-updates
Hi.
A friend bricked the bangle.js. He installed a game code in the flash. So the watch just boot into the game. I have tried trouble shouting. I have the MAC address, but it doesn't help when I can't connect with the web browser. But I can connect with espruino cli, however I don't have any bootload file or code to run. Where can I found the bootloader files so I can install and execute from the terminal?