@DrAzzy that's what I'd suggested in the write-up I believe. With a decent length of wire going to the LEDs I felt it needed a decently low resistance to get a nice clean waveform.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@DrAzzy that's what I'd suggested in the write-up I believe. With a decent length of wire going to the LEDs I felt it needed a decently low resistance to get a nice clean waveform.
@Mrbbp so you're using Espruino Pico?
As you say you'll struggle to get more than 400mA out of USB on the Pico, as there is a fuse in there to stop accidental shorts causing problems.
I'd use an external 5v supply. Does this diagram help?
1 Attachment