Support for STM32 Nucleo?

You are reading a single comment by @asez73 and its replies. Click here to read the full conversation.

•

ac413

I can confirm this also works for the STM32f411RE! the 411 has 100mhz and 128 kb sram, so it is a bit more powerful. Making a few changes would be better, but the stm32f401re.bin file does work with the slightly more powerful 411 MCU. The st link software is not as happy when programming; it disconnects and sends an error after. But it does work, and connects to the IDE with no problems. So I am happy! Thanks asez73!

•

asez73 in reply to @ac413
Hi ac413,

So it worth to note that you should rebuild the .bin from the github deposit.

I changed a few lines that makes it work very correctly now for the Nucleo-401RE.

If you can test, I will push to my github the required files for the NucleoF411RE.
The flash size and pinout of those Nucleo-F4x1RE boards are exactly the same.
It is just a matter of memory sizes and frequencies of processor, so I think it won't break anything.

To build your own .bin you need to launch a terminal from ubuntu and type:
```
 # change to your local git cloned directory
cd ~/Espruino
 # make the expruino firmware
NUCLEOF411RE=1 make
 # flash it to the Nucleo board
cp espruino_*_nucleof411re.bin /media/your user/NUCLEO
```

About

Avatar for asez73 @asez73 started