You are reading a single comment by @BogdanG and its replies. Click here to read the full conversation.
  • T68i has the same DCU-11 interface as the T630 (uart interface with unfriendly connector, some people managed to solder 3 cables /rx, tx, gnd/ directly to the phone). I bought USB to DCU-11 cable and simply cut off the USB part and soldered serial cables to the plug).
    The bad news is that you need to use PDU mode (7 bit encoding scheme also used by the Nokia FBUS):­ncode-decode


Avatar for BogdanG @BogdanG started