You are reading a single comment by @enaon and its replies.
Click here to read the full conversation.
-
You could look at this code: https://banglejs.com/apps/?id=shownearby
this is how I found out that you have phy working :)
I will test some more, if you both get longer distance with phy then maybe I didn't test good enough.
But if it is ~100 meters in openspace, then maybe it is not as impressive as I though it could be. I was hoping for something like 500 meters in city environment, like an info that another euc rider is nearby. :)
thank both for the info.
enaon
You could look at this code: https://banglejs.com/apps/?id=shownearby
I have tested that app in the past when making it and I can't say I got 1km but it was a hell of a lot more than I get with normal BLE - well over 100 meters between two bangles when outside.
My understanding is that the coded phy kind of just adds error correction, so the actual rssi value you see may not go up with coded phy, it's just that you now receive messages that would previously have failed the CRC check.