-
• #2
What kind of ESP8266 board do you have?
What happens if you press reset on the ESP8266 while the IDE is connected?
-
What kind of ESP8266 board do you have?
NodeMCU v2 or v3 - I'm not exactly sure which version.
What happens if you press reset on the ESP8266 while the IDE is
connected?The error is the same..
Connected to COM8 (No response from board) -
I use git bash for Windows.
cd "D:\Espruino" git clone https://github.com/espressif/esptool cd "D:\Espruino\firmware" python "../esptool/esptool.py" --port COM8 erase_flash python "../esptool/esptool.py" --port COM8 --baud 115200 write_flash --flash_freq 80m --flash_mode qio --flash_size 32m 0x0000 boot_v1.6.bin 0x1000 espruino_esp8266_user1.bin 0x3FC000 esp_init_data_default.bin 0x3FE000 blank.binD:\Espruino\firmware\ == http://www.espruino.com/files/espruino_2v08.zip -> espruino_2v08_esp8266_4mb
-
• #7
What is the output of the flash command?
-
cd "D:\Espruino\firmware" $ python "../esptool/esptool.py" --port COM8 erase_flash esptool.py v3.1-dev Serial port COM8 Connecting.... Detecting chip type... ESP8266 Chip is ESP8266EX Features: WiFi Crystal is 26MHz MAC: cc:50:e3:df:01:5e Uploading stub... Running stub... Stub running... Erasing flash (this may take a while)... Chip erase completed successfully in 13.2s Hard resetting via RTS pin... $ python "../esptool/esptool.py" --port COM8 --baud 115200 write_flash --flash_freq 80m --flash_mode qio --flash_size 32m 0x0000 boot_v1.6.bin 0x1000 espruino_esp8266_user1.bin 0x3FC000 esp_init_d ata_default.bin 0x3FE000 blank.bin WARNING: Flash size arguments in megabits like '32m' are deprecated. Please use the equivalent size '4MB'. Megabit arguments may be removed in a future release. esptool.py v3.1-dev Serial port COM8 Connecting.... Detecting chip type... ESP8266 Chip is ESP8266EX Features: WiFi Crystal is 26MHz MAC: cc:50:e3:df:01:5e Uploading stub... Running stub... Stub running... Configuring flash size... Flash params set to 0x004f Compressed 3856 bytes to 2763... Writing at 0x00000000... (100 %) Wrote 3856 bytes (2763 compressed) at 0x00000000 in 0.3 seconds (effective 95.2 kbit/s)... Hash of data verified. Compressed 534596 bytes to 350986... Writing at 0x00001000... (4 %) Writing at 0x00005f4f... (9 %) Writing at 0x0000aff7... (13 %) Writing at 0x000103f6... (18 %) Writing at 0x00016fda... (22 %) Writing at 0x0001d856... (27 %) Writing at 0x00023cdd... (31 %) Writing at 0x0002b04b... (36 %) Writing at 0x000334f9... (40 %) Writing at 0x0003a225... (45 %) Writing at 0x00040317... (50 %) Writing at 0x000463fb... (54 %) Writing at 0x0004c4dc... (59 %) Writing at 0x00052511... (63 %) Writing at 0x000577a2... (68 %) Writing at 0x0005cde4... (72 %) Writing at 0x00062490... (77 %) Writing at 0x00067d37... (81 %) Writing at 0x0006d4d6... (86 %) Writing at 0x0007355a... (90 %) Writing at 0x0007b267... (95 %) Writing at 0x00080532... (100 %) Wrote 534596 bytes (350986 compressed) at 0x00001000 in 32.3 seconds (effective 132.3 kbit/s)... Hash of data verified. Compressed 128 bytes to 75... Writing at 0x003fc000... (100 %) Wrote 128 bytes (75 compressed) at 0x003fc000 in 0.1 seconds (effective 16.3 kbit/s)... Hash of data verified. Compressed 4096 bytes to 26... Writing at 0x003fe000... (100 %) Wrote 4096 bytes (26 compressed) at 0x003fe000 in 0.1 seconds (effective 520.1 kbit/s)... Hash of data verified. Leaving... Hard resetting via RTS pin... $ pyserial-miniterm COM8 115200 --- Miniterm on COM8 115200,8,N,1 --- --- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H --- ;{lp�o�␐␃␌␌{�����␌␌␌␄#␄o�|␃쎎�b��no�␂␄␌l`␂�␛␛no␄$`␂␏␃n{���o␌␌␃␌�␎lp�n�␐␃␌␄r������l␄␄#␄n�|␃��␜�␄#��nn�␃␌␄$ ␃�␒␒on␌l`␂␎␂o{����␃␌␌�␂$ ␃␏{��o␄␄�␃l`␂{l��o܌�nn����r␛nnn�␄$�b�{$␀␄�␒�l�␛�ۂ␂␄␄␌␌␌�␌␄␄$$d~{$ ␀␌�␒�$dln��␀␌␄␄␄␄␌�␌l�$$␎l␀␄�␛�l��o�␂n��n~␒␂��$l�#␌�$$p"�␃b{���$ nl����l b$ ␃$��n␂␄�o���n$�|␒b␛␌␀␃$␄␄␌l`␂{l��␃�␒�o��r��n|�␄$␌l$$`␂␜c�␒␃␌�|␂r�␃$�n�␄�o�␀␌l ␃��{�d�l␒�␛[?7l ____ _ | __|___ ___ ___ _ _|_|___ ___ | __|_ -| . | _| | | | | . | |____|___| _|_| |___|_|_|_|___| |_| espruino.com 2v08 (c) 2019 G.Williams Espruino is Open Source. Our work is supported only by sales of official boards and donations: http://espruino.com/Donate Flash map 4MB:512/512, manuf 0x1c chip 0x3016 >The firmware is uploaded without problems. But the board doesn't connect to IDE ...
-
• #9
Okay, looks like your nodemcu works, maybe the ESP8266 is not ready by the time the IDE tries to query board info.
What happens if you try hitting enter in the IDE a couple of times? Do you get a new prompt (the>character)? Or what happens if you type1+2and hit enter? -
What happens if you try hitting enter in the IDE a couple of times?
Nothing happens
Do you get a new prompt (the > character)?
No
Or what happens if you type 1+2 and hit enter?
Input is blocked in IDE. Below the inscription: CONNECTED TO COM8 (NO RESPONSE FROM BOARD)
-
Here are sequentially screenshots of the IDE when connected to the board.
Maybe the problem is in the IDE settings or in the drivers? I am using windows 8.1.
-
Hi everyone, I have the same problem as this person. Please help me.
AkosLukacs
MaBe
user158405
Gordon-
Post a reply
About
Error connect to ESP8266 in WinIDE
Posted by
@Chuvak2007f
Hi All! Need help.
Espruino IDE (Native) espruino_ide_win64_0v72.1
Firmware ESP8266 2v08
IDE Error:
I set in the IDE-COMMUNICATIONS-Baud Rate = 115200 !
There is a connection via the COM-terminal, but the IDE does not want to connect! What is the problem?
IDE-CONSOLE: