-
The BTHRM widgets should be blue/dark blue for the "BT HR" recorder, green/dark green >for the "HR int" internal recorder and no other colors should be possible. The normal >"HRM" recorder (icon should be red) is enough if you set BTHRM to replace the HRM event.
U 're right, and everything was fine before. I've just realized that the README refers to the "HR recorder" and I was referring to the HRM Widget(widhrt)
Another possibility would be a low memory mode hard coding a lot more of the connection >steps without the custom logic for handling many of the errors and parsing of additional >data like battery and HRV data.
I was wishful thinking about an alternative solution to settings on the watch and its higher use of variables.
I mean adding the possibility of configuring an app from the app loader page, so the users chose parameters and then before upload there is a realtime modification of the app code and
values are hardcoded on the javascript.
You are reading a single comment by @dapgo and its replies.
Click here to read the full conversation.
dapgo
You should get BT HRM only when selecting the custom mode and setting that to:
Replace HRM ✔️ (replacing the internal sensors values)
Start w. HRM ✔️ (react to the same power calls as the internal sensor)
HRM Fallback ☐ (do not try to activate the internal sensor if BT gets lost)
Moving the code that is able to detect and pair with sensors into the settings could probably reduce the RAM use by quite a bit with the cost of always having to pair a sensor before use. That is probably not really a problem, most devices I know actually need some configuration before using a HRM instead of using whatever is available.
Another possibility would be a low memory mode hard coding a lot more of the connection steps without the custom logic for handling many of the errors and parsing of additional data like battery and HRV data. Even restoring the initial implementation as base app and making the current one into a BT HRM+ version like many clocks are currently having would probably help a lot on B1.
The BTHRM widgets should be blue/dark blue for the "BT HR" recorder, green/dark green for the "HR int" internal recorder and no other colors should be possible. The normal "HRM" recorder (icon should be red) is enough if you set BTHRM to replace the HRM event.