Puck.js failed to update firmware; can't hard reset now.

You are reading a single comment by @AkosLukacs and its replies. Click here to read the full conversation.

•

Gordon

Something is not right with the Web Ide

I just tried it again on Chrome and it works fine here. The .bin is to be expected, since that's what is inside the firmware update .zip. Could you give it a go on Chrome and see if it works?

Pico firmware update with the Web Ide asks me to choose from a firmware with either WIZNet W5500 or TI CC3000 networking

Yes - since there's enough space you just get a choice of which one you want. If you don't use it then it doesn't matter. Both have AT command networking as well, and it is mentioned in passing at http://www.espruino.com/Quick+Start+USB#software-updates

Looks like the build is missing

Which one? I just tried the Pico update and that works fine too.

•

AkosLukacs in reply to @Gordon
Puck -> tried it with Chrome, and same behaviour: that green progress bar is stuck, and doesn't go anywhere. (screenshot is taken after waiting a couple of minutes) Reboot, and back to previously flashed firmware.

Pico -> Ah, OK. I did update it, so no problem there. What was confusing is the download page https://www.espruino.com/Download lists firmwares with WIZnet and TI CC3000. But the latest master build https://www.espruino.com/binaries/travis/master/ doesn't have either.

1 Attachment

About

Avatar for AkosLukacs @AkosLukacs started