You are reading a single comment by @user65682 and its replies. Click here to read the full conversation.
  • I can confirm that the red led was lit all the time when in bootloader mode. I still couldn't see it via nRF Connect.

    I failed to connect via the serial console on either board - due to my poor attempts at wiring and not wanting to make a mistake and damage the board(s).

    I couldn't see anything different between the working board and the bad board but have uploaded three files:

    1) good puck left - bad puck right.jpg.
    2) bad puck - side view.jpg
    3) bad puck - top view.jpg. (different lighting conditions).


    3 Attachments

    • bad puck - top view.jpg
    • bad puck - side view.jpg
    • good puck left - bad puck right.jpg
About

Avatar for user65682 @user65682 started