New joint DHT11/DHT22 module

You are reading a single comment by @Gordon and its replies. Click here to read the full conversation.

•

Gordon

So it works the first time, but not subsequent ones?

What about the old version, which is:

var dht = require("https://raw.githubusercontent.com/espruino/EspruinoDocs/f884681b9b1d76dc8685249afac6f2b4ce2a1542/devices/DHT22.js").connect(pin);

•

hygy in reply to @Gordon

This is what I get from this old version:

>reset();
=undefined
 _____                 _
|   __|___ ___ ___ _ _|_|___ ___
|   __|_ -| . |  _| | | |   | . |
|_____|___|  _|_| |___|_|_|_|___|
          |_| http://espruino.com
 1v85.tve_master_cee7141 Copyright 2016 G.Williams
Espruino is Open Source. Our work is supported
only by sales of official boards and donations:
http://espruino.com/Donate
Flash map 4MB:512/512, manuf 0xe0 chip 0x4016
>echo(0);
=undefined
{ "temp": 25.2, "rh": 46.1 }
Temp is 25.2 and RH is 46.1
{ "temp": 25.2, "rh": 48.4 }
Temp is 25.2 and RH is 48.4
{ "temp": 25.2, "rh": 48 }
Temp is 25.2 and RH is 48
{ "temp": 25.2, "rh": 49.9 }
Temp is 25.2 and RH is 49.9
{ "temp": 25.3, "rh": 49.9 }
Temp is 25.3 and RH is 49.9
{ "temp": 25.3, "rh": 50 }
Temp is 25.3 and RH is 50
{ "temp": 25.3, "rh": 49.8 }
Temp is 25.3 and RH is 49.8
{ "temp": 25.3, "rh": 49 }
Temp is 25.3 and RH is 49
{ "temp": 25.3, "rh": 48.5 }
Temp is 25.3 and RH is 48.5
>clearInterval()
=undefined

Dont know when it works with the new. If I plug and unplug about every second, some times, it write out some negativ values, but the other part is just no data.

New joint DHT11/DHT22 module

About

Espruino