You are reading a single comment by @Jean-Philippe_Rey and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@Jean-Philippe_Rey
@Gordon: Gordon, you got the answer! "Luckily, there is an easy fix ! Just put a solder bridge between pins 19 and 20 of the flat cable going to the OLED and everything works :-)"
I soldered pin 19&20 together, and, TadaAAAAaM, it just works!
I spent hours reading threads and comments, I did not cross that one!
Thank you Gordon!
Just a bit of further information: For those who bought their OLED displays on Hobbyking (the ones that are manufactured by hexTronik). You should not have to patch the reset circuit, it already exists on the PCB (R3 and C10, next to pin 14). If someone wants to have a look at the patch, you'll find nice pictures of the patch here: https://github.com/hallard/ArduiPi_SSD1306/issues/1
1 Attachment