-
-
-
First of all: Didn't know where to post this. Please move this post to the correct place if possible.
Is it just me or does the forum no longer send notifications via email when an answer is posted to a followed thread?
I have several threads marked as "Following" and "Notify me by email " and in my settings i got the global "Enable notifications" switch enabled as well but i do not receive any emails for a few weeks it seems. -
I've had it happen a few times and running the battery down to completely power the watch off is what solves it for a while
I see something similar on my B2: I can only get a GNSS fix after rebooting the watch.
Until i do that it tries to get a fix for several minutes - without success. After reboot the fix is there in a less than a minute usually - if i am outside. -
-
-
I reported this issue some time ago on Github: https://github.com/espruino/BangleApps/issues/1873
-
@fanoush i tried your build and erased that flash page. It worked!
The Bangle booted with
Checking storage...
Storage is corrupt.
Erasing Storage Areaand now welcomes me with the welcome screen. I will restore my backup and see if everything works.
Thank you so far!
-
-
@Gordon the watch was stuck on friday morning and i reseted it by pressing the button for 6 seconds. It then switched into bootloop mode. I was wearing the watch before and did not upload any code for days.
The firmware you attached boots!
Should i stay on this or try to reflash a flash-build again? -
No chance to get between those two messages "Checking storage..." and "Storage OK" - it's like 1ms time between them.
I tried several times to release the button at various times in the boot loop but no success.
Maybe @Gordon has an idea what to do here :)
-
The instructions say
You should now have the Bangle.js logo, version, and MAC address on screen, and you can release the button
but my watch does not get into this state. It keeps rebooting with "Checking storage...
Storage OK" and "Watchdog.
DFU 2v12
Check storage.
No new FW.
Booting...".My button is not stuck as I can switch to DFU mode by releasing the button while === are on the screen.
I already let the battery run flat and charged it but it is still stuck.
-
-
My Bangle.js 2 is in a bootloop since this morning.
I See the bootscreen
Booting....
Checking storage...
Storage OK.Booting...
Checking storage...
Storage OK.And so on.
I can start the dfu mode and flash a firmware package but after reboot it loops again.
I can not connect via Bluetooth with App Loader because the connection drops every few seconds.
Any idea what I can do?
-
@Fteacher there is already an open merge request which updates the AGPS data app to allow configuration of which GNSS types (GPS, BDS, GLONASS) will be used:
https://github.com/espruino/BangleApps/pull/2028It also allows automatic update in the background.
-
I put together a MR for this: https://github.com/espruino/BangleApps/pull/2005
-
Different vibration pattern for incoming calls is not yet implemented but should be pretty straight forward:
- we need to duplicate the configurations for the notification vibration pattern into call vibration pattern configuration
- notifications from call-apps should be using that new vibration pattern.
- we need to duplicate the configurations for the notification vibration pattern into call vibration pattern configuration
-
-
-
I was using the cutting Edge build: espruino_2v13.123_banglejs2 in the last days until I found out that no notifications at all are shown on the watch via Android Gadgetbridge.
Today I switched back to 2v13 release and notifications are working again.
I had no time yet to find out which build does the regression.
-
-
-
I am sorry, i didn't read the README in total. I now understand why this is expected.
Thank you for clarification.