user134201
Member since Sep 2021 • Last active Sep 2021Most recent activity
-
- 3 comments
- 1,510 views
-
- 7 comments
- 1,692 views
-
-
Windows: I Found the baudrate setting. Changed to 115200 and it worked -> Party!!!
In ubuntu it did not work in any way:
- Changed speed to 115200 -> still "Connection Failed."
- I found the option to connect to TCP/IP -> still "Connection Failed."
- I tried both the WebIDE and the Chrome App. The same results.
- I tried USB2 but also USB3 -> "Connection Failed."
- Changed speed to 115200 -> still "Connection Failed."
-
Hello guys,
I use this ESP32 board from Olimex: https://www.olimex.com/Products/IoT/ESP32/ESP32-EVB/open-source-hardware
I uploaded the firmware. WiFI connect at start-up works (done with minicom).
Although minicom is working without any issue on Ubuntu aand Windows, the WebIDE does not work on any of the OSs.WeIDE: on Ubuntu I can find the board on port ttyUSB0. I hit connect. I get the following message: "Connection Failed. "
WebIDE: On Windows 10: I find the device on COM 3. I connect the device. Two messages appear, one after the other:
- "Unable to retreive bopard information. Connection Error?"
- "Connected to Web Serial, webserial:1202:6c9f (No response from board)"
Any solution you know for this?
As the board connects to the WiFi, can't the WebIDE connect to the board over the WiFi? - I tried and I cannot connect to the ESP WiFI network.Thank you in advance.
- "Unable to retreive bopard information. Connection Error?"
Hello guys,
I am using this board which has, along with WiFi, one RJ45 Ethernet port: https://www.olimex.com/Products/IoT/ESP32/ESP32-EVB/open-source-hardware
Does anyone know if the RJ45 port is supported for Ethernet communication?
Thanks in advance.