RTL8720DN(BW16) Not responding after updating Firmware

Posted on Tue 10th, October 2023

• #1

user156724
i have interfaced RTL8720DN(BW16) module (not development board) with ATMEGA2560 through serial. Previously i tested my application (MQTT) using AMB23 (RTL8722DM MINI) development board. so we gone to our own board with RTL8720DN(BW16) module and controller ATMEGA2560. it works fine and i can able to connect the network, but i cant able to find MQTT commands in the datasheet. Somebody told me to update the firmware, and i find ImageTool from realtek and updated the firmware as they instructed. now i cant able to send AT Commands as the module doesn't response for the AT commands. How shall i roll back the firmware to previous one. if any body have AT commands for RTL8720(BW6) module pls help me.

2 Attachments
• #2

Gordon

Hi - I think you've posted on the wrong forum - looks like you have an Arduino? I don't think you're using Espruino on any of those boards?

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.