I bought this board:
And flashed the espruino_esp32.bin according to the instruction posted here: https://photopizza.org/#!instructions
Now I want to use this board for a different project with Arduino IDE. I got some troubles with simple web server tutorials such as this: https://randomnerdtutorials.com/esp32-web-server-arduino-ide/
I manage to upload sketches and to see the board in AP mode, but not in STA mode.
I'm a newbie, I guess the ESP32 has several partition, and I wonder if there's the way to put it back in factory condition, since the changes I made could be the problem's source.
thanks for the help
Forum yesterday was down in Italy.
Hope to have some feedback.
use esptoo.py with erase flash
I used this twice:
esptool.py --chip esp32 erase_flash
But still can't see it as a STA in my network. I thought this command was not enough for erasing the bootloader.
Now the ESP32 is clean, without any firmware, next is to install the firmware you like to run.
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© Espruino, powered by microcosm.
Report a problem