it was months ago.
I succeded flashing and operating it, but then the prototype was left in a corner.
I remember it was not immediate, and I troubleshooted somewhere, but unfortunately I did not took notes of it.
I can only suggest to look for solution for this specific case.
Hi there, I just followed the instructions here:
And I remember I had to install Python and flash the ESP32 from it.
I used this twice:
esptool.py --chip esp32 erase_flash
But still can't see it as a STA in my network. I thought this command was not enough for erasing the bootloader.
Forum yesterday was down in Italy.
Hope to have some feedback.
I bought this board:
And flashed the espruino_esp32.bin according to the instruction posted here: https://photopizza.org/#!instructions
Now I want to use this board for a different project with Arduino IDE. I got some troubles with simple web server tutorials such as this: https://randomnerdtutorials.com/esp32-web-server-arduino-ide/
I manage to upload sketches and to see the board in AP mode, but not in STA mode.
I'm a newbie, I guess the ESP32 has several partition, and I wonder if there's the way to put it back in factory condition, since the changes I made could be the problem's source.
thanks for the help
© Espruino, powered by microcosm.
Report a problem