I would try all the combinations - D5, nodemcu:D5 and work your way through the range.
You can paste in the left side of the ide, and press the button and see if you have output - if not use the up arrow and then back arrow and change to D6, and hit return. Very quickly you can go through the whole range...
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
Looking here https://forum.wemos.cc/topic/8/d1-to-ardÂuino-uno-pinout-associations/2
The pinouts are no clearer!
I would try all the combinations - D5, nodemcu:D5 and work your way through the range.
You can paste in the left side of the ide, and press the button and see if you have output - if not use the up arrow and then back arrow and change to D6, and hit return. Very quickly you can go through the whole range...