Andrey

Most recent activity

• Serial6.setConsole() doesn't work on NUCLEO 401

  @Andrey started

  • 4 comments
  • 3,187 views

  @Gordon replied
• Serial6.setConsole() doesn't work on NUCLEO 401

  in General • 9 years, 2 months

  

  yes, I was wrong with Serial1 - I thought I use Serial 1, but it was Serial2. Serial1 works ok with BT via pins D8 and D2. Serial 6 - still not.

• Serial6.setConsole() doesn't work on NUCLEO 401

  in General • 9 years, 2 months

  

  Hi, All!
  Subj.. It doesn't write "Console moved to Serial 6" , and doesn't move the console. As well as Serial2 also.
  Why?
  Thanks!

• F4 discovery doesn't start properly if I use USB to serial adapter connected to Serial 4 (A0,A1)

  in Interfacing • 9 years, 4 months

  

  Thanks! It was pretty easy :-).

• F4 discovery doesn't start properly if I use USB to serial adapter connected to Serial 4 (A0,A1)

  @Andrey started

  • 5 comments
  • 3,348 views

  @Andrey replied
• F4 discovery doesn't start properly if I use USB to serial adapter connected to Serial 4 (A0,A1)

  in Interfacing • 9 years, 4 months

  

  Gordon, could you please tell how to move those BTN1 functionality to another pin.. To A6 for example. I checked system_stm32f4xx.c from \targetlibs\stm32f4\lib but didn't get any idea how to manage It...

• F4 discovery doesn't start properly if I use USB to serial adapter connected to Serial 4 (A0,A1)

  in Interfacing • 9 years, 4 months

  

  Hi, all!
  Seems to It because of BTN1. If It pressed, it doesn't start also. How can I disable this feature? To start in case - if A0 pin pulled up, or not.
  Thanks!

• flashing raw stm32f103rct6 chip

  @Andrey started

  • 10 comments
  • 4,857 views

  @Gordon replied
• flashing raw stm32f103rct6 chip

  in General • 9 years, 5 months

  

  Thanks, Gordon
  I suggest, I soldered it wrong. will remake it totally..
  Just.... Do I have to set "Jump to the user program" checkbox on the picture above?

• flashing raw stm32f103rct6 chip

  in General • 9 years, 5 months

  

  rst pulled up to "+"
  boot 0 - 0
  boot 1 not connected