fishhf

Most recent activity

• Battery drain with custom clock

  @fishhf started

  • 19 comments
  • 1,203 views

  @Gordon replied
• Battery drain with custom clock

  in Bangle.js • 6 months, 1 week

  

  It seems to be fixed, thanks a lot Gordon!

• Battery drain with custom clock

  in Bangle.js • 6 months, 1 week

  

  Let me try right away.
  I was suspecting it's the GPS during the weekend but the setGPSPower needs an appID which doesn't seem I could toggle it globally and gave up.

• Battery drain with custom clock

  in Bangle.js • 6 months, 2 weeks

  

  Just uploaded a video of resetting it and leaving it alone without changing any settings after charged for about an hour.
  It takes about 3 hours to go from ~3.80v to ~3.35v.

  I've added chapters in the video description, so don't use the embedded viewer.

  https://www.youtube.com/watch?v=luqHR-pWiR0
  

• Battery drain with custom clock

  in Bangle.js • 6 months, 2 weeks

  

  Hi Gordon, all the tests were ran until the battery is completely flat, not able to turn on until it's plugged in.

  I've checked the watch this morning and it used up the remaining battery in the recovery menu as well.

  I've just started recording a video of me doing a reset and leaving it without changing any settings.

  My previous tests involved connecting it to my computer to set the time, and also changing the LCD brightness and calibrating the touches and not allowing it to connect from bluetooth. I've never paired it with my phone other than connecting it via chrome from my PC.

• Battery drain with custom clock

  in Bangle.js • 6 months, 2 weeks

  

  Hi Gordon,

  I've done overnight charging plus some more during daytime just to be sure. The draining speed is roughly the same.
  I'm going to let the watch stay at the recovery menu and see if it survives tonight.
  Let me know if you want me to flash anything special on it too :)

  @user158424 Are you still getting drains or something worked for you?

• Battery drain with custom clock

  in Bangle.js • 6 months, 2 weeks

  

  I've reset it from the "Util" menu, is it different from the recovery one?

• Battery drain with custom clock

  in Bangle.js • 6 months, 2 weeks

  

  Hi Gordon, I've just finished testing, the watch lasted from about 8:00am to 4:45pm fully charged to shuts itself off.
  It is on 2v23, factory reseted, using just Anton clock, bluetooth off, wake only on button.

  I've also sent an email to Christine just now. Thank you.

• Battery drain with custom clock

  in Bangle.js • 6 months, 2 weeks

  

  Hello!

  I've just got my Bangle.js 2 and created a custom watch face for it.
  It basically just draws a cat image, then digits with a black border.
  To create the black border, the font was drawn first by shifting up/down/left/right in black, then white in the center.

  But somehow my watch dies and turns off within a day, so I'm not sure if it's my code. I've attached the code and a screenshot of it.
  The LCD brightness was at 0.1, 5 secs timeout with only wake on button. Other than that everything is from factory with this watch face installed. It was on firmware 2v22, I'm retesting it with anton watch and 2v23 currently.

  Drawing an image every minute shouldn't use drain the battery that much?

  Edit: Bluetooth was off.