m-p{3}

Most recent activity

• Turn off the display after a while

  in Bangle.js • 1 year, 5 months

  

  If the screen isn't changing, the power consumption is basically null, as if it was off. You won't save battery by blanking it out.

• Lost charger cable for bangle.js2

  in Bangle.js • 1 year, 6 months

  

  So far I haven't had much luck finding an equivalent on Amazon Canada.

  Is there documentation on the pinout order?

• How can I check the power draw of an application?

  in Bangle.js • 1 year, 9 months

  

  I cannot upgrade firmware through Gadgetbridge as the upload always stops at 5-10%

  I have the same issue with Banglejs Gadgetbridge (v0.71.2a-banglejs, from Google Play Store), so I usually disconnects from GB and do the update through https://banglejs.com/apps using Chrome / Bromite.

• How can I check the power draw of an application?

  in Bangle.js • 1 year, 9 months

  

  Two days later, the difference is quite drastic, with the same set of apps.

• How can I check the power draw of an application?

  in Bangle.js • 1 year, 9 months

  

  I switched back to 2v16 and the battery draw is back to normal. I'll have to dig deeper to find the source of the drain.

• How can I check the power draw of an application?

  in Bangle.js • 1 year, 9 months

  

  Sadly I don't, I didn't get the chance to look at the logs before it happened. I've reconfigured my watch from scratch, keeping the apps and tweaks to a minimum. We'll see how it goes from there, and if the battery drain happens again I'll make sure to capture the logs often.

• How can I check the power draw of an application?

  in Bangle.js • 1 year, 9 months

  

  Hmm so I enabled logging, the watch got really sluggish, and at some point frozen. I had to force it to reboot and it said

  Checking storage...
  Storage is corrupt.
  Erasing Storage Area...
  

  😬

• How can I check the power draw of an application?

  in Bangle.js • 1 year, 9 months

  

  It would be really handy to troubleshoot battery life issues, right now I'm struggling to keep it to last two days on a single charge, and I ran a calibration after charging it for three hours, the flattened the battery, recharged it for thee hours and the issue persists, so I don't think it's a calibration issue.

  I don't receive more notifications than usual either.

  Device Type	BANGLEJS2
  Firmware Version	2v16.183
  Apps Installed	launch (0.20), boot (0.56), widlock (0.08), widalarm (0.01), widmessages (0.04), messages (0.58), agenda (0.13), files (0.08), widbt_notify (0.17), calclock (0.06), widclk (0.07), mylocation (0.09), owmweather (0.02), widslimbat (0.01), weather (0.24), wid_edit (0.02), sched (0.21), qmsched (0.09), alarm (0.38), authentiwatch (0.07), android (0.23), astrocalc (0.04), quicklaunch (0.10), messageicons (0.05), messagegui (0.65), setting (0.58)
  

• [SOLVED] Unable to set alarms or any time-related settings (alarm, quiet mode)

  @m-p{3} started

  • 4 comments
  • 563 views

  @myxor replied
• [SOLVED] Unable to set alarms or any time-related settings (alarm, quiet mode)

  in Bangle.js • 1 year, 10 months

  

  Yep, that did it, forgot about that settings 😳