peruperu

Most recent activity

• RAK5010 NB-IoT Tracker

  @peruperu started

  • 59 comments
  • 16,624 views

  @Gordon replied
• RAK5010 NB-IoT Tracker

  in Other Boards • 5 years, 2 months

  

  Support for the new device in subject is planned?

  https://store.rakwireless.com/products/rak5010-nb-iot-tracker

• RAK8212 and E.enableWatchdog

  @peruperu started

  • 2 comments
  • 1,731 views

  @Gordon replied
• RAK8212 and E.enableWatchdog

  in Other Boards • 5 years, 3 months

  

  On RAK8212 E.enableWatchdog is Hardware or Software?
  I would like the reset to happen even the code is running correctly.

• RAK8211, code stop when not connected to Web IDE in any way

  in Other Boards • 5 years, 3 months

  

  Thanks, I then found the same solution and it seems to work.

• RAK8211, code stop when not connected to Web IDE in any way

  @peruperu started

  • 3 comments
  • 1,995 views

  @peruperu replied
• RAK8211, code stop when not connected to Web IDE in any way

  in Other Boards • 5 years, 4 months

  

  Using the console.log command causes code execution to stop when the Web IDE is not connected.
  As written in the command note, it seems to occur anyway.

  Note: If you're connected to a computer (not a wall adaptor) via USB
  but you are not running a terminal app then when you print data
  Espruino may pause execution and wait until the computer requests the
  data it is trying to print.

• RAK8211 GPS not working

  in Other Boards • 5 years, 4 months

  

  Ok, for switching between device but, I have wait at least one hour. You mean that the device can't send any data on the serial port until have a fix?
  I have replicated a part of code in RAK8211.js but nothing...

  Serial1.removeAllListeners();
  Serial1.setup(9600,{tx:D9,rx:D8});
  Serial1.on("data", function( data )
  {
    console.log(data);
  });
  
  D10.set();
  

  Other GPS device send data always to serial port.
  Power is attached to battery input and is a 2A.

• RAK8211 GPS not working

  in Other Boards • 5 years, 4 months

  

  I can't get any communication with the GPS module, not even waiting a long time. Instead, I can communicate with the GSM module.
  Can the two modules be used simultaneously?