user85862

Most recent activity

• Changing Name in Profile

  @user85862 started

  • 6 comments
  • 4,326 views

  @Gordon replied
• EspruinoWifi: InternalError: InternalError: Timeout on I2C Write Transmit Mode 2

  @user85862 started

  • 4 comments
  • 2,817 views

  @Sacha replied
• Changing Name in Profile

  in The Place for Patreon Patrons • 6 years, 3 months

  

  Hi Gordon

  Not that importand but i would like to let you know.
  I logged in with google. It created user85862. When i click on "edit Profile" changing the username to "sacha" does not work.

  Sacha

• EspruinoWifi: InternalError: InternalError: Timeout on I2C Write Transmit Mode 2

  in Pico / Wifi / Original Espruino • 6 years, 3 months

  

  Hi Gordon
  I used 1V99. Thanks as allways for your fast answer. I will test it with software I2C and let you know.
  Last time it took 12 hours until the error happens.

  Sacha

• EspruinoWifi: InternalError: InternalError: Timeout on I2C Write Transmit Mode 2

  in Pico / Wifi / Original Espruino • 6 years, 3 months

  

  Hello Gordon

  I have 5x i2c rotary encoders wired, each on a diffenet i2c address:

  https://www.tindie.com/products/jgilbert/makernet-knob/

  I poll them every 250ms.

  But it is not stable. From time to time, maybe after hours, i catch the following error:

  "InternalError: InternalError: Timeout on I2C Write Transmit Mode 2"

  It's repeating endless until i force to reset/restart the espruino using my own E.enableWatchdog(); function. Memory usage is stable.

  I was not able to isolate the code. Here is a snip where i catch it.

  try {
          I2C1.writeTo(...,....);
          d = I2C1.readFrom(...., 8);
  }
  catch(x) {
          log(x); // InternalError: InternalError: Timeout on I2C Write Transmit Mode 2
  }
  

  After a soft restart of the espruino using my own watchdog reset, everything is fine again. The encoders are not reseted or restarted. No powercycle was made for the encoders.

  Is there a way to recover this i2c issue without a restart of the espruino ?

  Thanks

  Sacha

• setWatch "false" trigger ?

  @user85862 started

  • 10 comments
  • 4,456 views

  @user85862 replied
• setWatch "false" trigger ?

  in Interfacing • 6 years, 10 months

  

  Flashed 1V96, same result. Even on another EspruinoWifi.
  I'm a bit confused.

  Sacha

• setWatch "false" trigger ?

  in Interfacing • 6 years, 10 months

  

  It triggers "false" on the other pin. This is the right value. But i do not wan't this information, because that is the current unchanged state.

  There is a workaround. I will remember the states and ignore the same value.

  Sacha

• setWatch "false" trigger ?

  in Interfacing • 6 years, 10 months

  

  It happen each time. Very easy setup.

  Connected the PIN 3.3v to the butten or switch and then to A1 (Btn1) and A4 (Btn2).
  I think it happens on other pins too.

  Sacha

• setWatch "false" trigger ?

  in Interfacing • 6 years, 10 months

  

  Still triggers both Watches.