-
• #2
Did you update your Bangle.js firmware, or just the apps using https://banglejs.com/apps/ ?
If it's the firmware then maybe try https://www.espruino.com/Bangle.js#resetting-without-loading-any-code then go to https://banglejs.com/apps/ and ensure all your apps are up to date
-
• #3
I uploaded some code on WEB IDE but uploaded the destination Flash, after that everything is not working normally.
I can't work on bangle now -
• #4
Yes, i've followed both instructions
-
• #5
Ok, so what happened when you did that is you overwrote the bootloader. I should add a warning to the Web IDE when it's connected to the Bangle, but some people legitimately use it so I can't remove it.
To fix it, follow the instructions I mentioned above, but remove and re-install Bootloader and that'll fix it.
Or just use 'install default apps' in the app loader which will overwrite everything and return it to a 'factory' state.
Hey all,
After updating the firmware on my bangle it has been stuck on the homescreen as shown in the picture, I hold and pressed button 3 but still didn’t work, and i also tried to reboot and it's still stuck :(