Node-Red with Bangle

Posted on Thu 28th, October 2021

• #1

Sarah1212
Hello All,
I installed EspruinoHub on my raspberrypi 4 -> https://github.com/espruino/EspruinoHub
And went on this document to connect it to Node-Red -> https://www.espruino.com/BLE+Node-RED
Everything went smoothly,

And I added a code that advertises the HRM to my bangle.
My problem is it is not seen on Node-Red, I can only detect the presence when I make the MQTTin general, but when i specify with my bangle MAC address nothing shows as shown in the picture all.

Please help out, as this is driving me crazy :)!

2 Attachments
• #2

Sarah1212

I made sure to go over all the comments stated previously, as i disconnected from WEB IDE and i made sure that the bangle isn't connected to anything

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.