Linux 1.96 build - ide upload via telnet does not complete

Posted on Wed 21st, March 2018

• #1

Wilberforce

I have an early build - it has the storage module, so must be quite recent.
All is ok with this build.

However with a fetch/pull of 1.96.22 and connecting on telnet 2323, when sending to via the ide, it does not complete. Disconnecting the ide does not release the telnet session.

The is on Linux on windows subsystem, which has worked fine in the past.
• #2

Gordon

Just tried a build from the absolute latest and it works great - so are you sure you remembered to do a make clean?
• #3

Wilberforce

Thanks - yes I did that. I might need to get it down to a simpler case. The code is using 3 local modules. I'll also take a closer look at the console log.

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.