• Doh! Small problem. Thought I'd check the CC3000 adafruit shield as an example of a shield that should work with Espruino, but there is a problem with the mapping. As Espruino requires a specific pin setup, I remapped all the required pins so it would work, but there is one conflict. pin B8 which is used for ICQ with the CC3000, is needed to map to the SCL pin on the Arduino (I could use the other SCL pin, but this is also required by the Espruino CC3000 setup, so it's not available).

    Are there plans to make this configurable later on?