Nightly 'bigram' (3250 jsvar) builds for Espruino Board 1.3/1.4

The v70 on there should be the same as this one - as a reality check,
make sure you code uploads on this:
espruino.com/binaries/git/commit_date/20­14-07-30%2017:00:29%20+0100/

quote from @DrAzzy Do note that the official github builds now have 2250 jsvars.

Ok, this "github" v70 firmware code works with my application user code Ok?
Note: The memory still shows 1800 jsvars? <---
Note: The upper ram test came back with the > after a few seconds.

Next test "again" bigram ...

Update ...
Again, I did another 12 minute throttling of bigram firmware link: (http://drazzy.com/espruino/bigram/esprui­no_1v70_08-05_espruino_1r3_bigram.bin)

My application "hangs" after uploading to the Espruino. The only way to revive communications is to disconnect/hard reset/reconnect.
Note: It runs fine on the github v70.

@DrAzzy I can send you a portion of my "top secret" application, for your inspection, but you probably don't have the hardware to run it on.