You are reading a single comment by @DrAzzy and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@DrAzzy
I am now building bigram espruino builds automatically every night (the bigram build is the one to use the full 64k ram 512k flash that the espruino boards seem to have, giving you a total of 3250 jsvars instead of 2600).
These are automatically built in the wee hours of the morning EST and made available at:
http://drazzy.com/e/espruino/bigram
No tests or checks are performed on builds prior to posting them - it is automated. These may not work on all Espruino boards - the manufacturer spec for the chips says they shouldn't work at all - but they seem to work on most boards. So far we have one report of a user who had a board that didn't work with bigram.
Also please read the linked page completely before using these builds.
If you have any problems, first verify that the problem does not occur on non-bigram build, then start a new topic with the word bigram in the subject.
IF YOU ARE USING ANY BIGRAM BUILD FROM BETWEEN 11/12 and 12/28 PLEASE UPDATE - THOSE BUILDS WERE BAD AND DISPLAYED SUBTLY BROKEN BEHAVIOR