⚡💡 Jolt.js now available! 🔌🔋

Jolt.js is now fully available to purchase:

It's a Bluetooth, JavaScript-powered device with powered outputs and screw terminals, so you can now use your JS knowledge to control things in the real world with nothing more than a screwdriver!

It's something I've been working on for a while, but I'm really excited by - it's always been more painful than I'd like to control 'real' things, but now it's super easy to control lights, motors, solenoids, relays and lots more, all while being super power efficient.

In the Jolt.js Bundle the small 300mAh battery will keep the Jolt.js running and available for Bluetooth connections for around 6 months (or over 2 years when sleeping) - but you can run Jolt.js out of much bigger batteries, or even connect it to 12v batteries with solar panels so you'll never have to worry about recharging again!

Features:

• Bluetooth Low Energy
  
• Espruino JavaScript interpreter pre-installed
  
• nRF52840 SoC - 64MHz ARM Cortex M4, 256kB RAM, 1MB Flash
  
• 8x high power 1A H-bridge outputs on screw terminals
  
• 4x Qwiic/Stemma connectors (2x analog capable with 500mA FET, 2x with 4x GPIO)
  
• 2.7v to 18v input range
  
• Ultra low power (down to 0.008mA) when idle
  
• LiPo battery connector with inbuilt charger
  
• USB-C with USB Serial support
  
• 1x 3mm mounting hole
  
• 1x Button
  
• 40mm x 40mm x 12mm with protective silicone case
  
• PCB Dimensions: 37.2mm x 36mm
  
  

Jolt.js is available as:

• A Bundle, including battery, box, screwdriver and cables: https://shop.espruino.com/joltjs-bundle
  
• Jolt.js with one cable: https://shop.espruino.com/joltjs