Bangle1 connecting SWD - VDD voltage

You are reading a single comment by @fanoush and its replies. Click here to read the full conversation.

•

user156811
That work great!

Steps to reset NR52 Device
- grab software here
- The apps built in Rust so you'll need that plus Rust package manager cargo
- also need "sudo apt-get install libusb-1.0-0-dev librust-pkg-config-dev"
- Then run nrf-recover
Error i saw

Error No supported probe was found - unplugged programmer device or not configured correctly

Error Didn't receive any answer during batch processing: - most likely you have your i2c lines mixed up

•

fanoush in reply to @user156811

Steps to reset NR52 Device

grab software here
The apps built in Rust so you'll need that plus Rust package manager cargo
also need "sudo apt-get install libusb-1.0-0-dev librust-pkg-config-dev"
Then run nrf-recover

Well what I meant is nrf_recover command/script defined inside OpenOCD nrf52 target https://github.com/openocd-org/openocd/blob/master/tcl/target/nrf52.cfg#L73 which can be typed in openocd command line as instructed by that message.

But it is great you are not satisfied with doing stuff in easy ways. The https://github.com/probe-rs/probe-rs used by that code looks like nice rust library for using those debug probes.

About

Avatar for fanoush @fanoush started