Unable to upload code to the Pixl.js running 2.18, disconnects while sending

You are reading a single comment by @Gordon and its replies. Click here to read the full conversation.

•

Gordon

I don't know if I can use SDK12 on the 52840's

No... But if you add 'NRF_SDK15=1' to the PIXLJS.py file under makefile then you might be able to build that for SDK15 and see if it changes things?

The issue is that to change the SDK it means new softdevice + bootloader, so you'd have to flash it over SWD :(

•

parasquid in reply to @Gordon

Ah that's an idea.

Flashing the Pixl.js over SWD is relatively easier (I can just make a jig with pogo pins). It's the MDBT42Q that's a bit of a problem since I prototype code and hw on the Pixl.js and then deploy it on the MDBT42Q :(

I'll let you know anyway if I'm able to make progress on the SDK15 for the Pixl.js :)

About

Avatar for Gordon @Gordon started