Unable to upload code to the Pixl.js running 2.18, disconnects while sending

You are reading a single comment by @parasquid and its replies. Click here to read the full conversation.

•

Gordon

I missed this last post - so you mean an up to date Bangle.js 2 using firmware we built does not disconnect itself when you send >20 chars? That is interesting...

•

parasquid in reply to @Gordon
Yeah, I just updated this banglejs2 using the App Loader. It's running Simple Clock and the vectorized Simple Clock.

update: I've recompiled the custom firmware for the xiao ble (uf2 builds are really convenient since I don't nede to hunt for my jlink, just a USB and double tap the reset button; if ever we get a pixl.js 2 with the nrf52840 I hope there would be something similar :P) with the lines you've mentioned
```
      'DEFINES += -DNRF_SDH_BLE_GATT_MAX_MTU_SIZE=131', # 23+x*27 rule as per https://devzone.nordicsemi.com/f/nordic-q-a/44825/ios-mtu-size-why-only-185-bytes
      'LDFLAGS += -Xlinker --defsym=LD_APP_RAM_BASE=0x2ec0', # set RAM base to match MTU
```
and I'm still able to paste in long char sequences. Checking again with the pixl/mdbt42q i get disconnected as soon as I try to paste the same sequence.

About

Avatar for parasquid @parasquid started