You are reading a single comment by @yngv126399 and its replies. Click here to read the full conversation.
  • I simply invoke process.memory() from the Web IDE console to get the current memory usage. The SN80 has about 2500 espruino memory variables in total - the change to the LCD driver frees up about 300. In general, real delays are a bad idea in Espruino, however, Timeout delays let other bits of code run which cause problems at system initialisation which is why I am using the real delays which stop anything else running while the LCD driver initialises the screen.

    A sweeping second hand would need to update the screen every 166ms and use a screen buffer as you say to avoid excessive flicker. I tried it as an experiment using a full screen 2 bit image buffer and it took 300ms for each update. It might work with @fanoush 's buffered driver....

  • Maybe 'sweeping' was a poor choice... just a second hand would do. (Perhaps an 52840 could handle the former?...) what I've noticed is that the YFit firmware (for the SN80-Y) has a few watch faces with a second hand that updates pretty darn well -- likely uses an optimized algorithm to determine what part of the screen to update.


Avatar for yngv126399 @yngv126399 started