Error when Initial flashing on windows

After seeing on http://www.espruino.com/ESP8266_Flashing#initial-flashing-on-windows , I tried to initial flash on windows to NodeMCU device(esp8266-esp12E).

After executing like below command:

But I saw the below error:

 python "..\esptool\esptool.py" --port COM6 --baud 115200 write_flash --flash_freq 80m --flash_mode qio --flash_size 32m 0x0000 .\boot_v1.6.bin 0x1000 .\espruino_esp8266_user1.bin 0x3fc0000 .\esp_init_data_default.bin 0x3fe0000 .\blank.bin
WARNING: Flash size arguments in megabits like '32m' are deprecated.
Please use the equivalent size '4MB'.
Megabit arguments may be removed in a future release.
esptool.py v3.1-dev
Serial port COM6
Connecting....
Detecting chip type... ESP8266
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: 84:f3:eb:b4:4d:f8
Uploading stub...
Running stub...
Stub running...
Configuring flash size...

A fatal error occurred: File .\esp_init_data_default.bin (length 128) at offset 66846720 will not fit in 4194304 bytes of flash. Use --flash-size argument, or change flashing address.

Please let us know how to change --flash-size argument, or change flashing address.

In addition, the type of my esp8266 board is "esp8266-esp12e-NodeMCU V2" board.
The information of board would be refered to the link, " https://components101.com/development-boards/nodemcu-esp8266-pinout-features-and-datasheet"

The page shows belows info. of my board.

NodeMCU ESP8266 Specifications & Features
Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
Operating Voltage: 3.3V
Input Voltage: 7-12V
Digital I/O Pins (DIO): 16
Analog Input Pins (ADC): 1
UARTs: 1
SPIs: 1
I2Cs: 1
Flash Memory: 4 MB
SRAM: 64 KB
Clock Speed: 80 MHz
USB-TTL based on CP2102 is included onboard, Enabling Plug n Play
PCB Antenna
Small Sized module to fit smartly inside your IoT projects

Please let us know how to change --flash-size argument, or change flashing address.