MDBT42 - BLE Transceiver

You are reading a single comment by @Invisibleman1002 and its replies. Click here to read the full conversation.

•

Gordon

That's totally fine. Especially for advertising.

You can just to NRF.setScan to scan for advertising, and the MDBT42's advertising will continue as normal.

Scanning can take a lot of power (12mA?) if you do it all the time, so I'd advise not using the Puck as you might run your battery down quite quick. Other stuff should be fine :)

•

Invisibleman1002 in reply to @Gordon

I plan on using a MDBT42 with a larger battery. I do need it to scan almost all the time. I would prefer to know when another MDBT42 is within range as soon as possible.

Do you recommend an example that shows how to set the MDBT42 as both a Scanner and broadcaster?

Thank you for your help,
Trey

About

Avatar for Invisibleman1002 @Invisibleman1002 started