You are reading a single comment by @Robin and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@Robin
Mon 2019.06.17
Hey @barry_b_benson, since you have quite a few LEDs, have you considered pulsing the on state, with say a thirty percent duty cycle, e.g. ON state == on for ~3ms, off for ~10ms, on for ~3ms, off for ~10ms, on for ~3ms, off for ~10ms, etc over the desired duration or something like that. Eye persistence would/may allow for the indication the LEDs are always on and would only draw 1/3 the power.