Espruino WIFI, RED Light fixed -> no TTY created on usb connected.

Posted on Thu 4th, January 2018

• #1

L0cutus
Hello,
After a:
```
reset();
save();
```
all stopped working, so i have tryed to reflash from WEB IDE and it worked (i mean no errors messages),
unfortunately i have no my espruino not working at all (i mean no TTY created while connected to my pc) and a RED led always on... any idea ?
Thanks !
• #2

Gordon

Are you sure you flashed the correct firmware? That can often happen if you write the firmware for a different device (or a broken firmware). It's easy to fix - just reflash.

You can also try powering on while holding the button for 5 seconds or so - it'll try and load Espruino but will make sure no saved code is loaded.
• #3

L0cutus

solved thanks, i think the problem was that i have 2 espruino devices attached to my pc (pico + wifi) and i think the web ide flashed the pico into the wifi :)
Now it works !
• #4

Gordon

Great! Yes, the Web IDE tries to auto-detect the device type based on the board that you last connected to - if that happened to be the Pico it'd have flashed that firmware.

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.