Binary messages on WebSockets

Posted on Sun 13th, November 2016

• #1

sammachin

I've got the ws client implementation working, however my server sends binary messages over a websocket, (RAW PCM Audio frames) Is there any way to handle these in espruino, i'd like to so some visualisations of the data with neopixels eventually.

It seems that a binary message doesn't invoke the on message event. I put logging of on raw in and this is what I get:

>echo(0);
=undefined
Connected!
RAW: HTTP/1.1 101 Switching Protocols
U
RAW: pgrade: websocket
Connection: Upgrade
Sec-WebSocket-Accept: BJcYBMUMFM4VKC/jom8iiI/n2Zo=
Connected to server
RAW: ~,RIFF$âWAVEfmt >}dataâ
RAW: üÿøÿ÷ÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿø
RAW: ÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
RAW: øÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿøÿ
>
Disconnected
Connected
>

• #2

allObjects

A message is detected by some begin and end delimiter or package length information When you send data, you have to provide something that the code in ws module can work with and trigger the message event...
• #3

Wilberforce

You could use the btoa function to covert before sending down the socket.

Also the ws module only supports 127 chars max for a message - that might be an issue for you..
• #4

allObjects

...module says up to 65536 bytes...
• #5

Gordon

It looks to me like that's still one complete message - like you're not sending small chunks, but are just sending one big chunk of wave file.

The Websocket library should handle binary data just fine, but will only notify you when it has received a complete frame of data (I think they all work like this). If that's a relatively big frame it could take a while - it may even run out of memory first.

I guess it's possible that the WebSocket library has some bug when handling frames >127 bytes? It might be worth testing it out with smaller size frames first

You can handle the binary data pretty easily once it's in - the trick is to try not to do any copies if you want to get a reasonable amount of speed out of it. Use E.toUint8Array() on the string, and then you can do things like E.FFT on it to pull out frequencies if you want to.

Were you trying to stream live wave data to it? The connection is usually only 115200 baud and it looks like you're sending 16 bit data, so you'll struggle I think. To have much chance of handling it live you'd be looking at 4ksps, 8 bit, mono I reckon.
• #6

Wilberforce in reply to @allObjects

Are - right you are...

https://github.com/espruino/EspruinoDocs/blob/master/modules/ws.js#L146
• #7

sammachin

Ah yeah those messages are a little larger they're 6k WAV with the header but I can break it up into 600 byte raw samples I forgot I was doing some conversion on the server!

I'll try smaller message sizes and report back

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.

Post a reply

About

Binary messages on WebSockets

Posted by Avatar for sammachin @sammachin

Actions