You are reading a single comment by @user67974 and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@user67974
I am also having trouble with resets. I have cleared 0x00000, through 0x300000.
This started when I tried to save code to flash. the write seemed successful but after this I've had problems. Kolban's example simple web server crashes/reboots as below whereas before It would run properly. Sadly, I have a second virgin nodemcu module that I also programed with 1.87 and it also resets. Any suggestions on this issue as well as a comprehensive way to clear all flash.? Any help greatfully accepted.
Regards, Jim Brooks
ets Jan 8 2013,rst cause:2, boot mode:(3,7)
load 0x40100000, len 1396, room 16
tail 4
chksum 0x89
load 0x3ffe8000, len 776, room 4
tail 4
chksum 0xe8
load 0x3ffe8308, len 540, room 4
tail 8
chksum 0xc0
csum 0xc0
2nd boot version : 1.4(b1)
SPI Speed : 80MHz
SPI Mode : QIO
SPI Flash Size & Map: 32Mbit(512KB+512KB)
jump to run user1 @ 1000
don't use rtc mem data