Pico Starter Kit

It was suggested in another post that a starter kit would be a good idea. It's something I'd always intended to do but that I've neglected recently...

So I'd like to get started with it again - I'd like to find a selection of parts that were relatively cheap and easy to source and that were good for a bunch of little projects, that I could put in an affordable kit that's quite compact (so easy for me to post out).

The last kit had a relay module that I'm not sure people really used much and that really pushed the weight/size up.

This time I'm thinking:

• 1x Pinned Pico
  
• 1x breadboard (a small one)
  
• Jumper wires
  
• 1x LCD/OLED
  
• Screw terminals that can plug into breadboard (maybe not?)
  
• 4x WS2812-style pinned LEDs
  
• 47uF capacitor (for LEDs)
  
• FET
  
• Red LED
  
• IR receiver
  
• IR transmitter
  
• LDR
  
• 100 Ohm, 10k Ohm Resistors
  
• Piezo speaker
  
• 2 Pushbuttons
  
• Vibration sensor
  
  

Any thoughts for other things that could be included?

Perhaps the kit could be slightly bigger/more expensive and could include:

• small servo motor (things that move are good :)
  
• ESP8266 WiFi module on a pinned board