You are reading a single comment by @RandyHarmon and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@RandyHarmon
Brewbit Model T has a STM32VF205, which appears to have enough memory to run Espruino, but I can't tell whether the CC3000 connections are on the expected pins, mostly because the schematics I'm finding for the official F103 aren't showing how the processor pins map to the Espruino-labeled pins.
I'm interested in using this hardware not least for its Wifi connectivity, but also because it has two temperature probes and will switch two AC ports.
https://github.com/brewbit/model-t-electronics
http://discourse.brewbit.com/t/model-t-resources/17
It connects to the Wifi controller as indicated here:
I figure I'll probably need to recompile the Esprino firmware to support the CC3000 connected this way, which I'm not (yet) familiar with... any hints toward that would be appreciated too.
Then there's flashing Espruino to this hardware, which I suppose is even more fundamental. They provide processor breakouts - seems quite similar to some of the "unofficial" hardware. All suggestions welcome.
R