You are reading a single comment by @DrAzzy and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@DrAzzy
Got it - I'll see if I can fix those. Anyone else?
There are only a couple of places where it's GND instead of Gnd, but it is kinda ugly.
A couple of other things I noticed - SC-70 (a readful slightly-smaller-than-SOT-23 package) should also work in the MSOP area.
Also - a couple of thoughts on things to put on them... My night-guidance light used one of the little ones (with an attiny85) and it made the hardware go together really easy. It uses an AOZ1282 buck converter in the SOT-23-6 area, which worked without issues. The same spot could also be used for a boost converter, or a switched capacitor voltage doubler (they make ones that regulate to 5v - they're not cheap, but they get you 5v from 3.3v with just the chip and 3 caps - input, output, and flying, (and you'd need one of those caps anyway), at like 100mA of current.