Search results for:

Or how about the buds having build in storage?

Indeed. Also if you trop the .min from the name you get a human readable version:
https://cdn.jsdelivr.net/npm/discrete-wa­velets@5/dist/discrete-wavelets.umd.js

I would grab the unified version from cdn and put it in the espruino ide and see what happens. Usual approach is to fetch the library as a single javascript file and save a copy in the bangle repo, e.g. see suncalc.js

WHO_AM_I is usually a register with a fixed value that helps you to identify that you are talking to the right chip on the bus. If this value is not read this is not good and usually means hardware problems

Try nail polish on the contacts. For the display try scratch remover polish. Not sure what to do about the button.

uhm, what do you mean by "worn out"?

Basically yes. It tells me that you were in state awake since 7:00 which is why it woke you up at 7:30. If it would wake you up later there is a risk for you falling into a deeper sleep state again.

What confuses me is the long awake phase from approx. midnight to 4:00.

You could do the following test

1. Create an alarm at least 45 minutes into the future.
   
2. Start sleepphasealarm and put the watch on a stable surface (table) and do not touch it
   
3. Approx. 10 minutes before the alarm move the watch. The alarm should go off exactly when you move the watch.
   

For debugging purposes a higher value helps, lets say 8h?

So I assume you set your alarm to 8:00. The question is why was the sleep tracking only started at 7:00? Did you set "Run before alarm" to only 1h?

@tipans You should be able to view the sleep plots in the development app loader:
https://espruino.github.io/BangleApps/?i­d=sleepphasealarm

Yea, already have fixed that locally, but not tested fully yet

new Date(typeof timeStr === 'string' ? timeStr : timeStr.ms)

Got it, looks like the json format written for dates changed in new firmware:

require("Storage").writeJSON("test.json"­, new Date());
>require("Storage").readJSON("test.json"­,1)
={ ms: 1710748136790.38647460937 }

earlier it was saved in a format like this:

>JSON.stringify(new Date())
="\"2024-03-18T07:51:46.241Z\""

@Gordon Is that intentional? I don't see it in the changelog up to firmware 2v21

Afaik the step counting is part of the firmware and always running. Health & co only display the value. In the case of health the value is also persisted.

uhm invalid date? Could you share your sleepphasealarm.json please? You can download it from the ide

I can only speak about sleepphasealarm, but this is what should be implemented. Can you please open the sleepphasealarm download interface (save icon in the app loader) and post a screenshot of an example line plot where it woke you up early?

I'm very confused about watch faces. I installed a couple different ones,

Sounds like you were able to connect to the app loader afterall.

My watch face would ideally be a large time, a weather indicator, step counter and battery remaining

Try Circles clock

I see it too on 2v21, but everything seems to work as expected. Maybe @Gordon has an idea where this comes from.

My applications are up to date.

Github issue or right here in the forum. Github has the advantage that you can ping any of the authors mentioned in the readme. Forum has the advantage that you already started this thread ;)

Failing code snippets might be helpful

Main usages:

-Obviously date+time
-Wakeup Alarm and Event alarm with alarm+sched
-calendar
-grocery: Shopping list
-Gipy: Following gpx-tracks while riding bike

Right, DFU Flashing works (did it from the IDE)

Problem is: How to go back? Flashing from app loader does not work and recovery menu does not work.

I guess it is not a good idea to update to bleeding edge 2v20.76?

> Uncaught SyntaxError: Got '(' expected ','
 at line 4 col 151 in locale
...i,Mi,Do,Fr,Sa".split(',')[d.getDay()+­(short?7:0)],month:(d,s...
                              ^
 at line 4 col 638 in locale
...istance:(n,dp)=>n<1000?round(n,dp)+"m­":round(n/1000,dp)+"km",...
                               ^
 at line 4 col 191 in antonclkplus.app.js
...dsWithColon?0:g.stringWidth(":")/2);v­ar dateStr2=(dateOnMain==="ISO8601"...
                                   ^
in function "draw" called from line 3 col 3714 in antonclkplus.app.js
...=false;queueMillis=60000;}draw();}els­e{if(drawTimeout)clearTimeout(d...
                                      ^
in function "updateState" called from line 4 col 1582 in antonclkplus.app.js
...gs();g.clear();updateState();Bangle.o­n("lcdPower",updateStat..

Are you sure this is not a widget taking more memory or app bug?

This is fastloading between antonclkplus and taglaunch witch a button press:

process.memory().usage;
=3506
process.memory().usage;
=5217
process.memory().usage;
=3606
process.memory().usage;
=5217
process.memory().usage;
=3606
process.memory().usage;
=5217
process.memory().usage;
=3606
process.memory().usage;
=5217
process.memory().usage;
=3606
process.version
="2v20.69"

Note: So far I only have reinstalled antonclkplus and taglaunch with new pretokenization.

Above I only see one increase for antonclkplus from 3506 to 3606 after taglaunch, probably from loading a lib or similar.

There is https://banglejs.com/apps/?id=widadjust