-
@urbiman: used 1.85, added code, compiled, flashed, tested and lost control ....
=undefined >require("ESP8266").deepSleep(1000*1000); In deepSleep() sleepTime: 1000000 =undefined >rLL¼°rBÂN<LÌ<p|¾Ìp²¾²¼ÌLpp~òN¾LNN¼2BB<pÌ<BL@rL2¾ò²Î22NNBpü
-
@user63214 at the moment crypto is not part of the official build, some folks are working on this.
-
@Gordon: now it works correct - thanks
-
downloaded module and added print raw value
raw value:010000000101000101000000001111011000111100 Temp is 24.6 and RH is 32.5 raw value:010000000101001000000000001111011000111111 Temp is 24.6 and RH is 32.8 raw value:010000000101000100000000001111010100111010 Temp is 24.5 and RH is 32.4 raw value:010000000101000011000000001111010100111001 Temp is -24.5 and RH is 32.3 raw value:010000000101000010000000001111010100111000 Temp is -24.5 and RH is 32.2 raw value:010000000101000010000000001111010100111000 Temp is -24.5 and RH is 32.2 raw value:010000000101000001000000001111010100110111 Temp is 24.5 and RH is 32.1 raw value:010000000101000001000000001111010100110111 Temp is 24.5 and RH is 32.1 raw value:010000000101000000000000001111010100110110 Temp is 24.5 and RH is 32 raw value:010000000100111110000000001111010100110100 Temp is -24.5 and RH is 31.8 raw value:010000000100111111000000001111010100110101 Temp is -24.5 and RH is 31.9 raw value:010000000100111111000000001111010100110101 Temp is -24.5 and RH is 31.9 >reset();
-
-
sometimes still returning negative temperature values with that module version, would say this is a ESP specific thing, will try by tomorrow again with a pico
=undefined Temp is 23.9 and RH is 34.8 Temp is -23.9 and RH is 34.6 Temp is 23.9 and RH is 34.5 Temp is -23.9 and RH is 34.3 Temp is -23.9 and RH is 34.2 Temp is -23.9 and RH is 34.2 Temp is 23.9 and RH is 34.1 Temp is 23.9 and RH is 34 Temp is 23.9 and RH is 34 Temp is -23.9 and RH is 33.8 Temp is -23.9 and RH is 33.8 >reset();
-
@Wilberforce, sure you can build without errors, but flashing with that image will permanently resting the ESP, just tested with 1v85
@Gordon now I have again time to continue testing with fonts in ROM
-
-
-
-
-
-
-
@Gordon sure, will run some test on Thursday
-
-
-
-
how to drive 16 tiled pixel square plates (8x8) with GRAPHICS ?
this is what I do at the moment:
build 4 columns, each with 4 plates and address them as four separated 8x32 plates, so everything has to be done four times and more ......
I would prefer to wire them up as zigzag and everything only one time if possible.
Can I overload Graphics coordinate calc function with my own to handle this, or is this mapping already there and I just missed it ?
Anyone else experimenting with more than 3 plates to draw big text, icons, pictures ..... ?
-
Before sending the init sequence a reset is needed, guess this is OLED specific. Mine is a 128x32 I2C from Adafruit and has a reset pin.
Should be added to the module as optional parameter and toggled before sending the init sequence.
calling connect:
var g = require("SSD1306").connect(I2C1, start,{pin:PIN});
add to module SSD1306:
...... var addr = 0x3C; if(options && options.address) addr = options.address; // reset if pin is given if (options && options.pin) digitalPulse(options.pin,0,5); // add // configure the OLED .....
-
-
USE_GRAPHICS=1 USE_CRYPTO=1 make
my understanding is that loading more code will reduce the freeHeap