Connecting the BMP280 barometric sensor to the Puck, lots of ERROR messages..

i am using a Puck.js
That definitely did the trick, great! Guess I will have to read up on why.

So I don't need to do the pinMode lines?

I am getting a reading, but somehow they don't change. I have had a sensor with a similar chip before and they normally are very sensitive. Am I missing something?

var i2c = new I2C();
i2c.setup({scl:D2,sda:D1});
var bme = require("BMP280").connect(i2c);
console.log(bme.getData());

setInterval("console.log(bme.getData())"­,1000);

 _____                 _
|   __|___ ___ ___ _ _|_|___ ___
|   __|_ -| . |  _| | | |   | . |
|_____|___|  _|_| |___|_|_|_|___|
          |_| http://espruino.com
 1v93 Copyright 2016 G.Williams
>{ "temp": -0.00000017881, "pressure": 0.01541300212 }
=undefined
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": 0.00312499999, "pressure": 500.01877148359 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": 0.00312499999, "pressure": 500.01877148359 }
{ "temp": 0.00312499999, "pressure": 500.01877148359 }
{ "temp": 0.00312499999, "pressure": 500.01877148359 }
{ "temp": 0.00312499999, "pressure": 500.01877148359 }
{ "temp": 0.00312499999, "pressure": 500.01877148359 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
{ "temp": -0.00000017881, "pressure": 0.01541300212 }
>reset();
=undefined